The 38DL PLUSis an advanced ultrasonic thickness gage. Uses dual element transducer for internally corroded applications, features include THRU-COAT and Echo-to-Echo. Uses single element transducers for very precise thickness measurements of thin, very thick, or multilayer materials.
The 38DL PLUS is an innovative instrument that signals a new era in ultrasonic thickness gaging. Its sealed case is designed to meet IP67 requirements to withstand the rigors of very wet or dusty environments. The color transflective VGA display provides superior readability from bright sunlight to complete darkness. It features a simple, ergonomic keypad that can be operated with the left or right hand for easy access to all functions.
Compatibility with single element transducers and duale.
Powerful measurement of thickness: 0.08 mm (0.003 in.) To 635 mm depending on the material and the feeler (25 in.).
Measuring the thickness of the corrosion with dual probes.
Measurements THRU -COAT and Echo -to-Echo on painted or coated surfaces.
Optional software tool for measuring oxide layers and magnetite deposits adhered to the interior of the tube.
All transducers are equipped with a standard resolution of 0.01 mm or 0.001 inches.
Optional software tool high resolution increased to 0.001 mm or 0.0001 inches. The resolution of monocrystal transducers 2.25 MHz to 30 MHz.
Optional measurement software tool multilayer is useful for calculating the thickness of until four layers simultaneously.
The optional software tool is very effective for measuring penetration attenuating materials such as fiberglass, rubber and foundries.
Thickness measurement of the propagation velocity and time of flight diffraction
Calculation of differential value and the reduction rate.
B-scan function of time; 10,000 readings per scan, with review mode.
High Dynamic Gain technology with digital filters Olympus.
Personalized creation and compensation of the route in V
Design according to EN 15317 standard.
Why these thickness gauges are different from others?
The design and manufacture of the 38DL PLUS has been designed to meet the requirements of tough applications and to withstand adverse conditions abroad inspection and production areas. Whether in wet or dusty conditions, in hot or cold climates, in areas with light or dark, the 38DL PLUS can tolerate any inspection work.
Do you Need a rugged equipment to resist withstand shocks, falls and accidents? The 38DL PLUS with its protective rubber boot and designed IP67, is the answer.
Compact (only 0,814 kg)
Robust design, according to protection index IP67
Safe operation in explosive environments Defined according to class, division 2, group D of the national fire protection association code (NFPA 70E), Section 500 and proven according to MIL-STD-810F, Method 511.4, Procedure I.
Resistance test to crashes.
MIL-STD-810F, Method 516.5, Procedure Y, 6 cycles each axis 15 g, 11 ms sine half wave.
Test of resistance to vibration: MIL-STD-810F, Method 514.5, Procedure I, Annex C, Figure 6, General exposure: 1 hour each shaft.
Wide range of operating temperature.
Protective base of Rubber and support.
Transflective VGA color display for outside and inside provide superior clarity.